User Instructions
Installation: The alarm should be fitted on the object using either
the double sided sticky tape (supplied) or using a screw. Do ensure the surface is clean and free from
grease.
Arming/disarming: To set the alarm insert the key, wait
one beep and take it out. The alarm beeps for 30 seconds. You now have this
time to straighten the painting, close the case etc before the alarm is
armed.
Sensitivity: The electronics have been set so that a
solid knock will set off the alarm. This is to enable
normal walking around, cleaning and dusting to be done and also for the
object to be moved carefully. Any sudden move, knock as in a tyoical theft
attempt will set the alarm off. Keep the key nearby.
Sensitivity can be adjusted. This is
done by inserting the sensitivity stick into the side slot potentiometer
(case top off) and turn anti-clockwise to make less sensitive.
Batteries: One 9volt PP3 is supplied, power saving circuitry means it
lasts 2 years. We recommend testing all alarms regularly.
|